Posted by Wayne on September 09, 2002 at 14:46:15:
In Reply to: Re: Demo posted by Eins on September 08, 2002 at 19:59:46:
The demo was a pressure pot with about a 6 inch glass front. Inside the pot was a group of samples that were all about 1/4 inch or so at 1 ata. There was a button for presurizing the test cell and the material would visibly compress. The different samples had dramatically different amounts of compression, but it was not something that I could measure since the "window" was in the way. I think it was in the RubaTex booth and theirs was the best in the pot.
Post a Followup